닌자 스타 냉장고 자석(Ninja Star Fridge Magnet)
![55c4143f-e3f2-4d49-a876-72617d84a96b.jpg](https://i0.wp.com/www.ohzemy.com/wp-content/uploads/kboard_attached/8/202406/667cb877c65224817772.jpg?resize=400%2C400)
![6870183e-b56d-4fe0-8172-5623d4c11bc8.jpg](https://i0.wp.com/www.ohzemy.com/wp-content/uploads/kboard_attached/8/202406/667cb87469d338928264.jpg?resize=400%2C400)
![b3e00f33-936e-45ed-9da6-8f3363ec22f2.png](https://i0.wp.com/www.ohzemy.com/wp-content/uploads/kboard_attached/8/202406/667cb870025e76845493.png?resize=400%2C400)
![e78831e2-b728-452e-8f11-bd914c352969.png](https://i0.wp.com/www.ohzemy.com/wp-content/uploads/kboard_attached/8/202406/667cb86cd7a254028132.png?resize=400%2C400)
![8b2fc6ca-adf7-4422-bdc5-b8af3e768820.png](https://i0.wp.com/www.ohzemy.com/wp-content/uploads/kboard_attached/8/202406/667cb8666dbe86251457.png?resize=400%2C400)
![9c45e442-c4d2-4edb-bb72-4537d17f7b48.png](https://i0.wp.com/www.ohzemy.com/wp-content/uploads/kboard_attached/8/202406/667cb862ac32e2969832.png?resize=400%2C400)
조회수
319
다운로드
0
파일명
Ninja-Star-Fridge-Magnet-6651273.zip
상세정보
출처: https://www.thingiverse.com/thing:6651273
Summary
This is just a fun little fridge magnet I designed. Make it look like the Foot Clan left messages.
Whole ninja star has also been uploaded so you can use a little slight of hand to pretend you threw it.
After printing you will need a pair of neodymium magnets. I used 2mm thick magnets. Files are available for 3mm, 4mm and 5mm diameters.
I printed these standing up with a skirt and support. It is probably possible and maybe even better to print them laying flat.
Happy printing.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:
Yes
- Supports:
Yes
- Resolution:
0.2mm
- Infill:
10%
- Filament brand:
Elegoo
- Filament color:
Gray
- Filament material:
PLA
- Notes:
This print is tilted 5 degrees from vertical. It may look incorrect in the slicer, but it is not.
Post-Printing
This fridge magnet is meant to have (2) neodymium magnets with a thickness of 2mm. Files have been uploaded for 3mm, 4mm and 5mm diameters.
I set mine using basic super glue.
Do yourself a favor and wait at least 5 minutes after gluing to test this on a metal surface.